Memo on fulfilling the requirements of the technical regulation "requirements for the safety of feed and feed additives". Certification of feed and feed additives Trade Union for Animal Feed
Due to the fact that the SPZ began to receive mass reports of punishments by the Rosselkhoznadzor of entrepreneurs producing feed, representatives of the wholesale trade and, especially, the retail trade, we studied this question and are ready to announce the following.On the basis of which article of the Code of administrative violations punished?
Article 14.43 of the Code of Administrative Offenses. Violation by the manufacturer, contractor (person performing the functions of a foreign manufacturer), seller of the requirements of technical regulations
1. Violation by the manufacturer, contractor (person performing the functions of a foreign manufacturer), seller of the requirements of technical regulations or applicable until the date of entry into force of the relevant technical regulations mandatory requirements to products or to products and the processes of design (including surveys), production, construction, installation, adjustment, operation, storage, transportation, sale and disposal related to product requirements, or release into circulation of products that do not meet such requirements, except for cases, provided for in Articles 9.4, 10.3, 10.6, 10.8, part 2 of Article 11.21, Articles 14.37, 14.44, 14.46, 20.4 of this Code, -
entails the imposition administrative fine for citizens in the amount of one thousand to two thousand rubles; on the officials- from ten thousand to twenty thousand rubles; on persons carrying out entrepreneurial activity without formation of a legal entity - from twenty thousand to thirty thousand rubles; on the legal entities- from one hundred thousand to three hundred thousand rubles.
So, we find out that before the entry into force technical regulations of the Customs Union "On the safety of feed and feed additives", there are mandatory requirements that must be met.
What are these requirements?
Decree of the Government of the Russian Federation of March 9, 2010 N 132
"On mandatory requirements for certain types products and the processes of design (including surveys), production, construction, installation, adjustment, operation, storage, transportation, sale and disposal related to the requirements for it, contained in the technical regulations of the Republic of Kazakhstan, which is a member state of the customs union.
From the text of the Resolution:
Article 46 federal law"O technical regulation" Government Russian Federation decides:
1. Approve the attached list of paragraphs of the technical regulations of the Republic of Kazakhstan, which is a member state of the customs union, which contain mandatory requirements for certain types of products and related requirements for design processes (including surveys), production, construction, installation, commissioning, operation, storage, transportation, sale and disposal, and introduce mandatory requirements from July 1, 2010.
2. By April 1, 2010, the Ministry of Industry and Trade of the Russian Federation, with the participation of the Federal Agency for Technical Regulation and Metrology, shall develop and approve a list of products subject to mandatory confirmation of compliance with the requirements provided for by the list approved by this Decree.
3. Determine that:
the applicant has the right to independently choose the mode of technical regulation, in accordance with which the assessment of compliance with the mandatory requirements provided for by the list approved by this resolution, or paragraph 1 of Article 46 of the Federal Law "On Technical Regulation" will be carried out;
forms of confirmation of conformity of products included in the list provided for in paragraph 2 of this resolution are determined in accordance with the resolution of the Government of the Russian Federation of December 1, 2009 N 982 "On approval of a unified list of products subject to mandatory certification, and a single list of products, the confirmation of conformity of which is carried out in the form of the adoption of a declaration of conformity";
state control (supervision) over compliance with the mandatory requirements provided for by the list approved by this resolution is carried out by federal bodies executive power within their competence;
authority to accredit certification bodies and testing laboratories(centers) performing work to confirm the conformity of products included in the list provided for in clause 2 of this resolution is carried out by the Federal Agency for Technical Regulation and Metrology within the limits of the maximum number of employees of the central office established by the Government of the Russian Federation and territorial bodies Agency, as well as the budgetary allocations provided for the Agency in federal budget for leadership and management in the area of established functions.
4. Federal Agency on technical regulation and metrology until April 1, 2010 to approve the list of documents used in the Republic of Kazakhstan in the field of standardization, as well as documents containing the rules and methods of research (testing) and measurements, including the rules for sampling required for the application and implementation of mandatory the requirements provided for by the list approved by this resolution, and the implementation of conformity assessment in relation to certain types of products and related requirements for processes, ensure its publication in a printed publication federal body executive power for technical regulation and placement in information system common use in electronic digital form.
Prime Minister
Russian Federation V. Putin
And now the main thing - about the requirements themselves!
The list of paragraphs of the technical regulations of the Republic of Kazakhstan, which is a member state of the customs union, which contain mandatory requirements for certain types of products and related design processes (including surveys), production, construction, installation, commissioning, operation, storage, transportation, sale and disposal (approved by Decree of the Government of the Russian Federation of March 9, 2010 N 132)
3. Clauses 6, 8, 10, 11, 14 - 16, 18 - 21, 23, 25 - 31, paragraph one, subparagraphs 2 - 4 of clause 33, clause 34 of the Technical Regulation "Requirements for the safety of feed and feed additives", approved Decree of the Government of the Republic of Kazakhstan dated March 18, 2008 N 263 (Collection of acts of the President of the Republic of Kazakhstan and the Government of the Republic of Kazakhstan, 2008, N 15, art. 138), according to Appendix N 3.
Technical regulation
"Requirements for the safety of feed and feed additives"
(approved by the Decree of the Government of the Republic of Kazakhstan dated March 18, 2008 N 2 63)
6. When selling and using, as well as importing (importing) feed and feed additives at domestic trade facilities, premises and conditions are necessary to ensure the possibility of acceptance, control, identification and storage of feed and feed additives in accordance with the current normative documents for specific types of feed and feed additives.
8. Not allowed for sale:
1) expired feed and feed additives;
2) feed and feed additives with obvious signs of spoilage;
3) feed and feed additives that do not have documents confirming their origin or for which there is no information;
4) feed and feed additives that do not correspond to the information reflected in the submitted documents;
5) feed and feed additives that do not have a label, indicating the information provided for by the Technical Regulations.
When selling feed and feed additives, special equipment is used, as well as marked trade inventory (ladles, tongs, scoops, etc.). It is not allowed to weigh unpackaged feed and feed additives directly on the scales without packaging materials.
10. Import (import) of feed and feed additives is carried out in compliance with the conditions that ensure their safety and the preservation of quality indicators established by the current regulatory documents on standardization.
11. It is forbidden to use for the production (manufacturing) of feed and feed additives raw materials originating from disadvantaged points (territories) for especially dangerous diseases of animals and birds included in the list of especially dangerous animal diseases, in which mandatory withdrawal and destruction of animals, products and raw materials are carried out of animal origin, which pose a particular danger to the health of animals and humans.
14. Storage of raw materials, equipment, packaging and auxiliary materials (hereinafter referred to as materials) must be carried out under conditions that ensure the safety of the finished product (feed and feed additives) and exclude the possibility of its associated contamination. When storing raw materials and materials, a rotation system should be used, providing for the release from the warehouse, first of all, of raw materials and materials that arrived in storage earlier than others. For the storage of feed and feed additives, special premises (structures) should be used that exclude the penetration of insects and rodents.
15. Compliance with safety requirements for preserving starters, enzymes, probiotic cultures, milk and whey (dry) must be ensured by their manufacturers. Each batch of these products intended for the preparation of feed and feed additives must be accompanied by veterinary documents the established form.
16. Requirements for the safety of feed and feed additives during their production (manufacturing) in accordance with veterinary and sanitary requirements include the establishment of the necessary levels of lighting, microclimate, noise, vibration and dust content and harmful substances in the air of the working area.
18. Security requirements technological processes(drying, grinding, granulation, the introduction of preservatives, fermentation, evaporation, pasteurization, sterilization) provides for compliance with the norms and requirements of regulatory and technical documentation for these products. The safety of technological processes is guaranteed by carrying out production control for their observance.
19. In the production (manufacturing) of feed and feed additives, the following requirements must be observed:
1) feed for productive ruminants should not contain components derived from any animals other than fish and other non-mammalian aquatic organisms;
2) feed for productive birds should not contain components of ruminants, predatory animals, and birds;
3) feed for productive pigs must not contain components of ruminants, predatory animals and pigs;
4) feed for productive animals originating from disadvantaged countries for bovine spongiform encephalopathy should not contain components derived from any animals other than fish and other non-mammalian aquatic organisms.
The criteria for the safety of canned feed, including industrial sterility, are the absence of microorganisms capable of developing at the storage temperature established for a particular type of canned food, as well as microorganisms and microbial toxins hazardous to animal health.
20. The quality and safety of feed and feed additives during production (manufacturing) are checked by conducting their own production control and veterinary and sanitary examination.
23. Placement of an object for the production (manufacturing) of feed and feed additives is carried out in the presence of a veterinary and sanitary conclusion.
25. The facility for the production (manufacturing) of feed and feed additives is located on the territory free from infectious diseases of animals and birds and is operated in compliance with the requirements of veterinary and sanitary rules.
26. Buildings and production facilities should provide:
1) the possibility of locating the production line and equipment for the production (manufacturing), storage of raw materials and materials in accordance with regulatory documents;
2) separation by partitions and / or separate rooms for the procurement of raw materials, the production and storage of feed and feed additives, to prevent contamination by microorganisms, dirt, reagents, and other types of contamination;
3) effective ventilation of industrial, auxiliary and amenity premises and premises where screening or other measures of protection against the access of birds, animals and insects are required in accordance with current regulations for industrial enterprises.
27. The preparation of industrial starters and/or probiotic cultures is carried out in a specially dedicated and properly organized starter department that meets the following requirements:
1) located in the same production building with the main consumer shops, in an isolated room;
2) have separate rooms in which conditions are created and maintained that ensure the protection of starter cultures and cultures from contamination by microorganisms, bacteriophages and other pollutants;
3) have supply and exhaust ventilation and (or) another effective air purification and treatment system.
The quality control of starter cultures and (or) probiotic cultures in the preparation (manufacturing) of industrial starter cultures and activated bacterial concentrates is carried out at all stages of the production cycle by the production control unit.
28. Production (manufacturing) facilities should be located away from:
1) pollution objects environment and industrial activities;
2) regions prone to floods;
3) areas prone to pest invasion;
4) areas where industrial waste (solid or liquid) cannot be effectively disposed of.
29. Feed and feed additives are stored in special warehouses under conditions ensuring their safety for animal consumption during due date validity.
30. The manufacturer (manufacturer) establishes the shelf life of feed and feed additives, the conditions for their storage and transportation, depending on the type and method of production (manufacturing).
It is not allowed to store and transport feed and feed additives together with fuels and lubricants and food products having a specific smell.
31. Feed and feed additives are transported in dry, clean vehicles, not infested with pests of fodder stocks, in the manner prescribed authorized body in the field of veterinary medicine.
33. Feed and feed additives are withdrawn from circulation when:
2) the absence of relevant documents confirming their origin and safety;
3) the presence of obvious signs of damage, pollution, unpleasant odor;
4) detection of especially dangerous diseases of animals and birds.
34. Feed and feed additives withdrawn from circulation are subject to veterinary and sanitary examination, the results of which determine their safety.
Get ready for testing!
PROJECT
Last revision March 2013
TECHNICAL REGULATIONS
OF THE CUSTOMS UNION
(TR 201_/00_/TS)
| Foreword | |||
| Article 1 | Application area | ||
| Article 2 | Rules for the identification of feed and feed additives | ||
| Article 3 | Definitions | ||
| Article 4 | Market Rules | ||
| Article 5 | Requirements for feed and feed additives | ||
| Article 6 | Requirements for the processes of production, storage, transportation, sale and disposal of feed and feed additives | ||
| Article 7 | Labeling requirements for feed and feed additives | ||
| Article 8 | Ensuring Security Compliance | ||
| Article 9 | Conformity assessment | ||
| Article 10 | Declaration of Conformity | ||
| Article 11 | State registration of feed additives | ||
| Article 12 | Veterinary and sanitary examination | ||
| Article 13 | Marking with a single mark of product circulation on the market of the member states of the Customs Union | ||
| Article 14 | State control(supervision) over compliance with the requirements of this technical regulation | ||
| Article 15 | Protective clause | ||
| Annex 1. | Feed and feed additive safety indicators | ||
| Appendix 2 | Maximum allowable residues of pesticides in feed and feed additives | ||
| Appendix 3 | Norms of permissible deviations from the declared values of indicators of feed for unproductive animals | ||
| Appendix 4 | Order state registration feed additives | ||
| Appendix 5 | The most common poisonous and harmful plants found in succulent feed | ||
| Appendix 6 | The most common poisonous and harmful plants found in roughage | ||
Technical regulation
"On the safety of feed and feed additives"
Foreword
1. This technical regulation has been developed in accordance with the Agreement on common principles and rules of technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation dated November 18, 2010.
2. This technical regulation was developed in order to establish in the single customs territory of the Customs Union uniform mandatory requirements for the application and implementation of feed and feed additives, to ensure the free movement of feed and feed additives put into circulation in the single customs territory of the Customs Union.
3. If, in relation to feed and feed additives, other technical regulations of the Customs Union have been adopted that establish requirements for feed and feed additives, then feed and feed additives must comply with the requirements of these technical regulations of the Customs Union, which apply to them.
Article 1 Scope
1. This technical regulation applies to feed and feed additives put into circulation in the common customs territory of the Customs Union, regardless of the country of origin.
This technical regulation establishes the requirements for feed and feed additives, which are mandatory for application and execution in the common customs territory of the Customs Union, as well as related requirements for the processes of their production (with the exception of the processes of growing and harvesting), storage, transportation, sale and disposal, as well as packaging and labeling, in order to protect the life and health of animals, humans, the environment, as well as to prevent actions that mislead purchasers of feed and feed additives regarding their purpose and safety.
2. The objects of technical regulation of this technical regulation are:
2.1 feed;
2.2 feed additives.
2.3 production, storage, transport, marketing and disposal processes related to the requirements for feed and feed additives.
3. This Technical Regulation does not apply to:
feed and feed additives produced by individuals and legal entities for personal use and not intended for release into circulation in the common customs territory of the Customs Union;
grain supplied for fodder purposes;
growing and forage harvesting processes.
Article 2 Rules andidentificationfeed and feed additives
1. For the purposes of classifying feed and feed additives as objects of technical regulation in respect of which this technical regulation applies, stakeholders identification of feed and feed additives.
2. Identification of feeds and feed additives is carried out by their name and (or) their features set out in the definitions in this technical regulation, and (or) visual and (or) organoleptic and (or) analytical method.
3. Identification of feed and feed additives is carried out:
3.1 by name - by comparing the name and purpose of feed and feed additives indicated in the labeling on consumer packaging and (or) in shipping documentation with the name indicated in the definition of the type of feed and feed additives in this technical regulation;
3.2 by visual method - by comparing the appearance of feed and feed additives with the features set out in the definition of such feed and feed additives in this technical regulation;
3.3 by organoleptic method - by comparing the organoleptic characteristics of feed and feed additives with the features set out in the definitions of such feed and feed additives in this technical regulation. The organoleptic method is used if the feed and feed additives cannot be identified by the method by name and visual method;
3.4 by analytical method - by checking the compliance of the physicochemical and (or) microbiological indicators of feed and feed additives with the features set out in the definition of such feed and feed additives in this technical regulation. The analytical method is used if feed and feed additives cannot be identified by name, visual or organoleptic method, etc.
Article 3. Definitions
The following terms and their definitions are used in this Technical Regulation:
1. amido-vitamin-mineral concentrate (AVMK) - a protein-vitamin-mineral concentrate in which part of the protein is replaced by non-protein nitrogenous substances intended for feeding to ruminants;
2. protein-vitamin-mineral concentrate (protein-vitamin-mineraladditive)- a homogeneous mixture of high-protein, mineral feed materials and feed additives, intended for subsequent mixing with feed materials in order to obtain a nutritionally balanced feed;
3. bentonite (diatomite, kieselguhr, perlite) fodder– feed material, which is a mixture of natural aluminosilicate minerals, and (or) aluminum oxide (alumina);
4. tree green vitamin flour- feed material obtained from artificially dried woody greens of coniferous and deciduous species with a high content of vitamins;
5. flavoring additives (dyes, flavorings)- feed additives consisting of a substance of natural or artificial origin, added to feed to improve or change its organoleptic properties, as well as the external and flavor characteristics of foods of animal origin and affect the color of ornamental birds and fish;
6. pomace fruit, berry and vegetable – feed material consisting of by-products of the canning and vegetable-drying industry;
7 . release of feedand feed additives– purchase and sale and other ways of transferring feed and feed additives in the single customs territory of the Customs Union, starting with the manufacturer or importer;
Feed production is the largest and most functional industry Agriculture, system-forming and linking it into a single whole, determining the interaction of Man and Nature
Confirmation of the safety of animal feed is carried out in the form of a declaration. On the territory of the Russian Federation, the registration of the declaration is carried out within the framework of the national GOST R system. Feed sold in our country must meet Russian requirements security.
The Russian norms will be valid until the moment when the specialized technical regulation of the Customs Union "On the safety of feed and feed additives" comes into force. To date, the public discussion of the draft regulation has been completed, and it has been submitted for internal approval. With the entry into force of the Technical Regulations, the declaration will be issued in accordance with the requirements of the Customs Union.
Which form of confirmation of conformity of animal feed should be chosen?
The legislation of the Russian Federation provides for only one mandatory form confirmation of conformity of animal feed - declaration of conformity. However, it is possible to combine safety assessment procedures to demonstrate the best aspects of a product. For example, in addition to the registered declaration of conformity of animal feed products, you can get a voluntary certificate from the Certification Center of NP RCS "Dontest". This document reflects quality characteristics goods.
The main document that establishes the types of products subject to declaration of conformity in the GOST R system is Decree of the Government of the Russian Federation dated December 1, 2009 No. 982. Animal feed is subject to registration of the GOST R declaration:
- fodder products of the alcohol and brewing industry
- animal feed and protein-vitamin additives for non-productive animals
- mixed fodder grains
- compound feed granulated
- compound feed for game
- complete granulated compound feed for rabbits
- briquettes and feed pellets
- compound feed concentrates for sheep, etc.
The procedure for registering the GOST R declaration for feed
Declaration of conformity of animal feed is carried out in most cases according to the 1d scheme, which includes its own materials confirming compliance with the requirements of the standards.
To register the declaration, the manufacturer/seller in this case must:
- Conduct tests on significant indicators established in GOSTs.
- Document the test results in a test report.
- Collect a set of documents, which includes information about the product, manufacturer and / or seller, specifications and other materials according to which animal feed is made.
- Fill out the declaration of conformity in the form, adopted by the resolution Rosstandart dated March 17, 1998 No. 12.
- Send to the certification body accredited for animal feed an application for registration of a declaration, a completed declaration and a set of documents.
The certification body, after considering all the information provided, makes a decision to enter the declaration in the state register. The registered declaration is assigned an individual number.
In some cases, the declaration of conformity of feed and feed additives for animals can be filled in according to the Unified Form adopted in the Eurasian Economic Union (decision of the Customs Union Commission dated December 9, 2011 No. 896). At the same time, the declaration procedure itself does not change - it is identical to the declaration of conformity according to the requirements of the GOST R system.
Compound feed-concentrate for suckling pigs;
Feed concentrate for pigs, etc.
The procedure for registering a declaration for feed according to the Unified Form of the Eurasian economic union
The sequence of registration of the declaration for animal feed and feed additives, adopted according to the unified form of the Customs Union, does not differ from the sequence established in the GOST R system. The difference arises in the list of products for which it is possible to issue a single declaration.
So, when making a TR CU declaration, it is mandatory to confirm compliance with the help of evidence obtained with the participation of a third party. Declaration of conformity in this case is carried out according to one of the schemes 2d, 3d, 4d, 5d, 6d or 7d.
With the entry into force of the technical regulation of the Eurasian Economic Union "On the safety of feed and feed additives", a declaration of conformity for animal feed products will be registered, subject to compliance with the requirements of such regulation. The requirements of state and interstate standards will cease to be mandatory.
To date, the draft technical regulation of the Customs Union for animal feed in the final version has been submitted for domestic approval.
Registration of the Declaration of the Eurasian Economic Union
The declaration of conformity with the requirements of the technical regulations of the Eurasian Economic Union is drawn up in accordance with the Unified Form approved by the decision of the Commission of the Customs Union dated December 9, 2011 No. 896 and is valid throughout the territory of the Eurasian Economic Union.
As one of the documents for drawing up a declaration of conformity in a single form for products included in the Unified List, certificates of conformity issued in national systems confirmation of conformity (certification) of the Member States of the Customs Union by certification bodies (assessment (confirmation) of conformity) included in the Unified Register of Certification Bodies and Testing Laboratories (Centers) of the Eurasian Economic Union.
The third party, when carrying out the procedure for declaring the conformity of products included in the Unified List, means certification bodies (assessment (confirmation) of conformity) and testing laboratories (centers) included in the Unified Register of certification bodies and testing laboratories (centers) of the Eurasian Economic Union .
When registering declarations of conformity in a single form, for products included in the Unified List, international state standards, national (state) standards of the Member States of the Eurasian Economic Union, as well as the Unified Sanitary and Epidemiological and hygiene requirements to goods subject to sanitary and epidemiological supervision (control) and Uniform veterinary (veterinary and sanitary) requirements for goods subject to veterinary control(supervision).
Currently, the Decision of the Commission of the Customs Union dated April 7, 2011 N 620 “On the Unified List of Products Subject to mandatory assessment(confirmation) of compliance within the Customs Union with the issuance single documents» The Unified list of products subject to mandatory assessment (confirmation) of conformity within the framework of the Eurasian Economic Union with the issuance of single documents in the form of a declaration of conformity based on evidence obtained with the participation of a third party includes Feed for animals, birds, fish:
Complete feed for poultry
Compound feed for poultry
Feed concentrates for pigs
Compound feed for control fattening of pigs
Compound feed concentrates for suckling piglets
Compound feed for bacon fattening pigs
Compound feed for pigs
Feed concentrates with ferrocyanides for cattle and small cattle
Feed concentrates for cattle
Compound feed-concentrates granulated for breeding mares
Compound feed concentrates for working horses
Compound feed-concentrates granulated for trained and sports horses
Compound feed-concentrates granulated for fattening horses
Compound feed-concentrates for rearing and fattening young beef horses
Compound feed concentrates for dairy mares
Compound feed for pond carp fish
Compound feed for underyearlings, two-year-olds and three-year-old pond cyprinid fish
Compound feed for cage fish
Premixes for farm animals, poultry and fish
Feed (feed mixtures) for farm animals, poultry, fish, produced using mobile units
Feed protein supplements:
sunflower meal
Sunflower cake
Rape meal toasted
rapeseed cake
Soybean fodder meal toasted
Soybean meal
Feed meal of animal origin (meat and bone, meat, blood, bone, from hydrolytic feather)
Feed meal from fish, marine mammals, crustaceans and invertebrates
Protein-vitamin and amido-vitamin supplements
Protein-vitamin-mineral supplements
Skimmed milk powder
Dry milk product
Powdered or whole milk substitutes, regenerated milk
Feed protein-fat enricher (OKBP)
Cormivid
Certification body for products and services NP RCS "Dontest" will help to correctly fill out the declaration of conformity on different kinds animal feed By contacting our experts, you will get a fast and reliable result.
to fulfill the requirements
technical regulation
Scroll
paragraphs of the technical regulations of the Republic of Kazakhstan, which is a member state of the customs union, which contain mandatory requirements for certain types of products and related design processes (including surveys), production, construction, installation, adjustment, operation, storage, transportation, sale and recycling
(approved by Decree of the Government of the Russian Federation of March 9, 2010 N 132)
Mandatory requirements for the safety of feed and feed additives contained in paragraphs6, 8, 10, 11, 14 - 16, 18 - 21, 23, 25 - 31, paragraph one, subparagraph 2 - 4 of paragraph 33, paragraph 34 of these Regulations, shall enter into force on July 1, 2010.
Technical regulation
"Requirements for the safety of feed and feed additives"
3. Requirements for the safety of feed and feed additives during their circulation in the territory of the Republic of Kazakhstan
6. When selling and using, as well as importing (importing) feed and feed additives at domestic trade facilities, premises and conditions are necessary to ensure the possibility of acceptance, control, identification and storage of feed and feed additives in accordance with the current regulatory documents for specific types of feed and feed additives .
8. Not allowed to be sold:
1) expired feed and feed additives;
2) feed and feed additives with obvious signs of spoilage;
3) feed and feed additives that do not have documents confirming their origin or for which there is no information;
4) feed and feed additives that do not correspond to the information reflected in the submitted documents;
5) feed and feed additives that do not have a label, indicating the information provided for by the Technical Regulations.
When selling feed and feed additives, special equipment is used, as well as marked trade inventory (ladles, tongs, scoops, etc.). It is not allowed to weigh unpackaged feed and feed additives directly on the scales without packaging materials.
10. Import (import) of feed and feed additives is carried out in compliance with the conditions that ensure their safety and the preservation of quality indicators established by the current regulatory documents on standardization.
4. Requirements for the safety of raw materials used for production
(manufacture) of feed and feed additives
11. It is forbidden to use for the production (manufacturing) of feed and feed additives raw materials originating from disadvantaged points (territories) for especially dangerous diseases of animals and birds included in the list of especially dangerous animal diseases, in which mandatory withdrawal and destruction of animals, products and raw materials of animal origin are carried out posing a particular danger to animal and human health.
It is prohibited to produce (manufacture) feed and feed additives from (using) tissues of animal origin.
14. Storage of raw materials, equipment, packaging and auxiliary materials (hereinafter - materials) must be carried out under conditions that ensure the safety of the finished product (feed and feed additives) and exclude the possibility of its associated contamination. When storing raw materials and materials, a rotation system should be used, providing for the release from the warehouse, first of all, of raw materials and materials that arrived in storage earlier than others. For the storage of feed and feed additives, special premises (structures) should be used that exclude the penetration of insects and rodents.
15. Compliance with the safety requirements for preserving starters, enzymes, probiotic cultures, milk and whey (dry) must be ensured by their manufacturers. Each batch of these products intended for the preparation of feed and feed additives must be accompanied by veterinary documents of the established form.
5. Requirements for the safety of feed and feed additives during their production (manufacturing)
16. Requirements for the safety of feed and feed additives during their production (manufacturing) in accordance with veterinary and sanitary requirements include the establishment of the necessary levels of lighting, microclimate, noise, vibration and dust and harmful substances in the air of the working area.
18. Requirements for the safety of technological processes (drying, grinding, granulation, the introduction of preservatives, fermentation, evaporation, pasteurization, sterilization) provide for compliance with the norms and requirements of regulatory and technical documentation for these products. The safety of technological processes is guaranteed by carrying out production control over their observance.
19. In the production (manufacturing) of feed and feed additives, the following requirements must be observed:
1) feed for productive ruminants should not contain components derived from any animals other than fish and other non-mammalian aquatic organisms;
2) feed for productive birds should not contain components of ruminants, predatory animals, and birds;
3) feed for productive pigs must not contain components of ruminants, predatory animals and pigs;
4) feed for productive animals originating from disadvantaged countries for bovine spongiform encephalopathy should not contain components derived from any animals other than fish and other non-mammalian aquatic organisms.
The criteria for the safety of canned feed, including industrial sterility, are the absence of microorganisms capable of developing at the storage temperature established for a particular type of canned food, as well as microorganisms and microbial toxins hazardous to animal health.
20. The quality and safety of feed and feed additives during production (manufacturing) are checked by conducting their own production control and veterinary and sanitary examination.
21. The content of toxic elements, pathogenic microorganisms, mycotoxins, nitrites, nitrates, pesticides, herbicides, radionuclides, marker polychlorinated biphenyls in feed and feed additives should not exceed the permissible veterinary standards (indicators) approved by the authorized body in the field of veterinary medicine.
6. Safety requirements for production facilities
(manufacture) of feed and feed additives
23. The placement of an object for the production (manufacturing) of feed and feed additives is carried out in the presence of a veterinary and sanitary conclusion.
25. The facility for the production (manufacturing) of feed and feed additives is located on a territory free from infectious diseases of animals and birds and is operated in compliance with the requirements of veterinary and sanitary rules.
26. Buildings and production facilities should provide:
1) the possibility of locating the production line and equipment for the production (manufacturing), storage of raw materials and materials in accordance with regulatory documents;
2) separation by partitions and / or separate rooms for the procurement of raw materials, the production and storage of feed and feed additives, to prevent contamination by microorganisms, dirt, reagents, and other types of contamination;
3) effective ventilation of industrial, auxiliary and amenity premises and premises where screening or other measures of protection against the access of birds, animals and insects are required in accordance with the current regulations for industrial enterprises.
27. Production starter cultures and/or probiotic cultures are prepared in a dedicated and properly organized starter department that meets the following requirements:
1) located in the same production building with the main consumer shops, in an isolated room;
2) have separate rooms in which conditions are created and maintained that ensure the protection of starter cultures and cultures from contamination by microorganisms, bacteriophages and other pollutants;
3) have supply and exhaust ventilation and (or) another effective air purification and treatment system.
The quality control of starter cultures and (or) probiotic cultures in the preparation (manufacturing) of industrial starter cultures and activated bacterial concentrates is carried out at all stages of the production cycle by the production control unit.
28. Production (manufacturing) facilities should be located away from:
1) objects of environmental pollution and industrial activity;
2) regions prone to floods;
3) areas prone to pest invasion;
4) areas where industrial waste (solid or liquid) cannot be effectively disposed of.
7. Requirements for the safety of feed and feed additives during their storage,
transportation, labeling and packaging
29. Feed and feed additives are stored in special warehouses under conditions that ensure their safety for consumption by animals during the established shelf life.
30. The manufacturer (manufacturer) establishes the shelf life of feed and feed additives, the conditions for their storage and transportation, depending on the type and method of production (manufacturing).
It is not allowed to store and transport feed and feed additives together with fuels and lubricants and food products that have a specific smell.
31. Feed and feed additives are transported in dry, clean vehicles that are not infected with pests of feed stocks, in the manner prescribed by the authorized body in the field of veterinary medicine.
8. Requirements for the safety of feed and feed additives during their destruction
33 . Feed and feed additives are withdrawn from circulation when:
2) the absence of relevant documents confirming their origin and safety;
3) the presence of obvious signs of damage, pollution, unpleasant odor;
4) detection of especially dangerous diseases of animals and birds.
34. Feed and feed additives withdrawn from circulation are subject to veterinary and sanitary examination, the results of which determine their safety.
A RESPONSIBILITY
for non-compliance with the requirements of the Technical Regulations
Article 14.43. Code of Administrative Offenses of the Russian Federation
Violation by the manufacturer, contractor (person performing the functions of a foreign manufacturer), seller of the requirements of technical regulations
1. Violation by the manufacturer, performer (a person acting as a foreign manufacturer), seller of the requirements of technical regulations or those to be applied prior to the date of entry into force of the relevant technical regulations of mandatory requirements for products or for products and design processes related to requirements for products (including surveys), production, construction, installation, adjustment, operation, storage, transportation, sale and disposal or release into circulation of products that do not meet such requirements, except for the cases provided for in Articles 9.4, 10.3, 10.6, 10.8, part 2 of Article 11.21, Articles 14.37, 14.44, 14.46, 20.4 of this Code, -
shall entail the imposition of an administrative fine on citizens in the amount of one thousand to two thousand roubles; on officials - from ten thousand to twenty thousand rubles; for persons engaged in entrepreneurial activities without forming a legal entity - from twenty thousand to thirty thousand rubles; for legal entities - from one hundred thousand to three hundred thousand roubles.
In order to implement the Law of the Republic of Kazakhstan dated November 9, 2004 "On technical regulation", the Government of the Republic of Kazakhstan DECIDES:
1. Approve the attached Technical Regulations "Requirements for the safety of feed and feed additives".
2. This resolution enters into force six months after the date of the first official publication.
Technical regulation
"Requirements for the safety of feed and feed additives"
1 area of use
1. This Technical Regulation "Requirements for the safety of feed and feed additives" (hereinafter referred to as the Technical Regulation) was developed in accordance with the laws of the Republic of Kazakhstan dated July 10, 2002 "On Veterinary Medicine", dated November 9, 2004 "On Technical Regulation" and July 21 2007 "On Food Safety" and establishes the minimum necessary requirements for the safety of feed and feed additives intended for feeding productive and unproductive animals, as well as for raw materials, starting materials, reagents and processes for their production, sale, transportation, use, storage and destruction.
The technical regulation applies to feed and feed additives produced (manufactured) and imported (imported), as well as intended for circulation in the territory of the Republic of Kazakhstan as animal feed, semi-finished products or raw materials for the production of other feed, regardless of the specifics of the technologies used.
The types of products subject to this Technical Regulation and their codes according to the classifier of the commodity nomenclature of foreign economic activity of the Republic of Kazakhstan (hereinafter - TN VED) are indicated in Appendix 1
This Technical Regulation does not apply to home-made (farm) prepared feed and feed additives intended for personal use and made from genetically modified plant and/or other raw materials.
2. The requirements of this Technical Regulation apply to the activities of all individuals and legal entities involved in the production (manufacturing), transportation, storage, sale of feed and feed additives.
3. Feed and feed additives, as well as raw materials in the process of production (manufacturing), storage and use may acquire risks to the health and life of animals, people using animal products in the following cases:
1) the occurrence of a hazard when harvesting near industrial enterprises or geochemical regions with increased radiation or heavy metal salt content;
2) use of low-quality or falsified raw materials and packaging material that does not meet sanitary standards;
3) non-compliance with the technological regimes of feed processing (reproduction of pathogenic microorganisms, accumulation of toxins) that contribute to the poisoning of animals;
4) improper use and storage of means of combating rodents, insects;
5) the use of canned feed containing an increased amount chemical substances(preservatives).
4. Risk management to prevent possible harmful effects is carried out at the stages:
1) procurement of feed and feed additives;
2) technological processes for the production (manufacturing) of feed and feed additives;
3) transportation and storage of feed and feed additives;
4) recycling and destruction of feed and feed additives.
2. Terms and definitions
5. The following terms and definitions are used in this Technical Regulation:
safety of feed and feed additives - the absence of unacceptable risk in all processes (stages) of development (creation), production (manufacturing), circulation, disposal and destruction of feed and feed additives;
feed - products of plant, animal, mineral, microbiological, chemical origin, used for feeding animals, containing nutrients in an assimilated form and not having a harmful effect on animal health;
feed additive - substances of organic, mineral and (or) synthetic origin used as sources of missing nutrients and minerals and vitamins in the diet of animals;
feed value - a set of feed properties, in the presence of which the physiological needs of animals are satisfied in essential substances and energy;
animals - all kinds of domestic, wild, zoo, circus, laboratory, decorative, fur, marine animals and other hydrobionts, birds, bees, fish;
expiration date - the period until the expiration of which the feed or feed additive is considered safe for its intended use, subject to the conditions of the processes (stages) of production (manufacturing), circulation of feed and feed additives;
compound feed - a mixture of various feeds and feed additives purified from impurities and crushed to the required size, providing complete feeding of animals of a certain type, type and productivity;
metal magnetic impurity - metal particles of various sizes and shapes contained in feed or feed additive that can be attracted to a magnet;
productive animals - animals used, or which can be used, to obtain livestock products;
unproductive animals - animals that are not purposefully used to obtain livestock products;
hay - forage obtained as a result of dehydration of grass and containing no more than 17% mass fraction moisture;
haylage - fodder prepared from herbs harvested in the early phases of vegetation, dried to a moisture content of at least 40%, and stored under anaerobic conditions;
pathogenic microflora - microorganisms capable of causing disease in animals;
unacceptable risk - a risk exceeding the level of product safety established in accordance with the legislation of the Republic of Kazakhstan;
shelf life - the period of time during which the feed or feed additive, subject to the established storage conditions, retains the quality and safety indicators specified in the regulatory documentation;
granular feed - compressed finely ground feed of a cylindrical or rectangular shape of certain sizes with a dry matter content in accordance with the requirements of regulatory and technical documentation;
risk - the probability of an adverse effect of feed and feed additives on animal health and the consequences of this effect, leading to a danger to the life and health of animals;
toxicity - a property of feed and feed additives that characterizes the content of toxic substances above the permissible level, which can cause disease or death of animals;
raw materials - objects of plant, animal, microbiological, chemical and mineral origin used for the production (manufacturing) of feed and feed additives;
roughage - feed containing no more than 22% moisture and 0.65 feed units per 1 kg of dry matter.
3. Requirements for the safety of feed and feed additives
when they are traded on the territory of the Republic of Kazakhstan
6. When selling and using, as well as importing (importing) feed and feed additives at domestic trade facilities, premises and conditions are necessary to ensure the possibility of acceptance, control, identification and storage of feed and feed additives in accordance with the current regulatory documents for specific types of feed and feed additives.
7. The main conditions for the circulation of feed and feed additives on the territory of the Republic of Kazakhstan are:
1) compliance of feed and feed additives with the requirements of this Technical Regulation;
2) availability of a document confirming the origin of feed and feed additives, confirmation of conformity (certificate of conformity and (or) mark of conformity or declaration of conformity);
3) availability of information about feed and feed additives in the labeling and (or) accompanying documents manufacturer, supplier and (or) seller.
Conditions, terms of storage and sale of feed and feed additives must exclude the possibility of any contamination and deterioration.
The implementation period is set by the manufacturer (manufacturer) in accordance with the current regulatory documents on standardization for feed and feed additives.
8. Not allowed for sale:
1) expired feed and feed additives;
2) feed and feed additives with obvious signs of spoilage;
3) feed and feed additives that do not have documents confirming their origin or for which there is no information;
4) feed and feed additives that do not correspond to the information reflected in the submitted documents;
5) feed and feed additives that do not have a label, indicating the information provided for by the Technical Regulations.
When selling feed and feed additives, special equipment is used, as well as marked trade inventory (ladles, tongs, scoops, etc.). It is not allowed to weigh unpackaged feed and feed additives directly on the scales without packaging materials.
9. Feed and feed additives imported (imported) into the territory of the Republic of Kazakhstan must be registered in State Register feed and feed additives in the Republic of Kazakhstan and comply with the requirements of this Technical Regulation.
10. Import (import) of feed and feed additives is carried out in compliance with the conditions that ensure their safety and the preservation of quality indicators established with the current regulatory documents on standardization.
4. Requirements for the safety of raw materials used for
production (manufacturing) of feed and feed additives
11. It is forbidden to use for the production (manufacturing) of feed and feed additives raw materials originating from disadvantaged points (territories) for especially dangerous diseases of animals and birds included in the list of especially dangerous animal diseases, in which mandatory withdrawal and destruction of animals, products and raw materials are carried out of animal origin, which pose a particular danger to the health of animals and humans.
It is prohibited to produce (manufacture) feed and feed additives from (using) tissues of animal origin.
12. The conditions for the procurement, storage and transportation of raw materials for the production (manufacturing) of feed and feed additives must comply with the requirements established by the legislation of the Republic of Kazakhstan in the field of veterinary medicine and food safety.
13. Succulent feed (green feed, haylage, silage) are used as feed in whole or processed form and as raw materials in the composition of complete feed and feed additives.
Green feed must comply with the quality indicators established with the current regulatory documents on standardization. Should not have signs of mold, foreign smell of poisonous plants.
Roughage (hay, straw) is used in its pure form and as a raw material in the composition of feed mixtures - for the production (manufacturing) of granulated feed. Roughage should not contain moldy areas, poisonous plants (creeping mustard, multi-colored ligature, leaf-tailed sophora), foreign odors (musty, mold, putrefactive), pathogenic fungi and yersinia.
Raw materials - grain (wheat, barley, oats, rye, corn, millet, peanuts, sunflower seeds, triticale) supplied for fodder purposes for the production of mixed fodder and leguminous fodder crops (spring vetch, chickpeas, fodder beans, lentils, fodder lupine, soybeans , peas) should not contain ergot, smut, pests and foreign matter. The grain used as a raw material must meet the requirements established by the relevant Technical Regulations.
Raw materials - root tubers and gourds (fodder) should not have signs of mold, and exceed established norms content of hazardous and toxic substances.
14. Storage of raw materials, equipment, packaging and auxiliary materials (hereinafter referred to as materials) must be carried out under conditions that ensure the safety of the finished product (feed and feed additives) and exclude the possibility of its associated contamination. When storing raw materials and materials, a rotation system should be used, providing for the release from the warehouse, first of all, of raw materials and materials that arrived in storage earlier than others. For the storage of feed and feed additives, special premises (structures) should be used to exclude the penetration of insects and rodents.
15. Compliance with safety requirements for preserving starters, enzymes, probiotic cultures, milk and whey (dry) must be ensured by their manufacturers. Each batch of these products intended for the preparation of feed and feed additives must be accompanied by veterinary documents of the established form.
5. Requirements for the safety of feed and feed additives when they are
production (manufacturing)
16. Requirements for the safety of feed and feed additives during their production (manufacturing) in accordance with veterinary and sanitary requirements include the establishment of the necessary levels of lighting, microclimate, noise, vibration and dust and harmful substances in the air of the working area.
17. Technological equipment, intended for the production of feed and feed additives must comply with the requirements established by the legislation of the Republic of Kazakhstan in the field of safety of machinery and equipment.
18. Requirements for the safety of technological processes (drying, grinding, granulation, the introduction of preservatives, fermentation, evaporation, pasteurization, sterilization) provides for compliance with the norms and requirements of regulatory and technical documentation for these products. The safety of technological processes is guaranteed by carrying out production control over their observance.
19. In the production (manufacturing) of feed and feed additives, the following requirements must be observed:
1) feed for productive ruminants should not contain components derived from any animals other than fish and other non-mammalian aquatic organisms;
2) feed for productive birds should not contain components of ruminants, predatory animals, and birds;
3) feed for productive pigs must not contain components of ruminants, predatory animals and pigs;
4) feed for productive animals originating from disadvantaged countries for bovine spongiform encephalopathy should not contain components derived from any animals other than fish and other non-mammalian aquatic organisms.
The criteria for the safety of canned feed, including industrial sterility, are the absence of microorganisms capable of developing at the storage temperature established for a particular type of canned food, as well as microorganisms and microbial toxins hazardous to animal health.
20. The quality and safety of feed and feed additives during production (manufacturing) are checked by conducting their own production control and veterinary and sanitary examination.
22. Feed and feed additives produced (manufactured) and imported (imported) into the territory of the Republic of Kazakhstan are subject to state registration in the manner established by law Republic of Kazakhstan in the field of veterinary medicine and food safety.
6. Safety requirements for production facilities
(manufacture) of feed and feed additives
23. Placement of an object for the production (manufacturing) of feed and feed additives is carried out in the presence of a veterinary and sanitary conclusion.
24. All objects are assigned account numbers in the manner prescribed by the legislation of the Republic of Kazakhstan in the field of food safety.
25. The facility for the production (manufacturing) of feed and feed additives is located on the territory free from infectious diseases of animals and birds and is operated in compliance with the requirements of veterinary and sanitary rules.
26. Buildings and production facilities should provide:
1) the possibility of locating the production line and equipment for the production (manufacturing), storage of raw materials and materials in accordance with regulatory documents;
2) separation by partitions and / or separate rooms for the procurement of raw materials, the production and storage of feed and feed additives, to prevent contamination by microorganisms, dirt, reagents, and other types of contamination;
3) effective ventilation of industrial, auxiliary and amenity premises and premises where screening or other measures of protection against the access of birds, animals and insects are required in accordance with the current regulations for industrial enterprises.
27. The preparation of industrial starters and/or probiotic cultures is carried out in a specially dedicated and properly organized starter department that meets the following requirements:
1) located in the same production building with the main consumer shops, in an isolated room;
2) have separate rooms in which conditions are created and maintained that ensure the protection of starter cultures and cultures from contamination by microorganisms, bacteriophages and other pollutants;
3) have supply and exhaust ventilation and (or) another effective air purification and treatment system.
The quality control of starter cultures and (or) probiotic cultures in the preparation (manufacturing) of industrial starter cultures and activated bacterial concentrates is carried out at all stages of the production cycle by the production control unit.
28. Production (manufacturing) facilities should be located away from:
1) objects of environmental pollution and industrial activity;
2) regions prone to floods;
3) areas prone to pest invasion;
4) areas where industrial waste (solid or liquid) cannot be effectively disposed of.
7. Requirements for the safety of feed and feed additives
during their storage, transportation, labeling and packaging
29. Feed and feed additives are stored in special warehouses under conditions that ensure their safety for consumption by animals during the established shelf life.
30. The manufacturer (manufacturer) establishes the shelf life of feed and feed additives, the conditions for their storage and transportation, depending on the type and method of production (manufacturing).
It is not allowed to store and transport feed and feed additives together with fuels and lubricants and food products that have a specific smell.
31. Feed and feed additives are transported in dry, clean vehicles that are not infected with pests of feed stocks in the manner prescribed by the authorized body in the field of veterinary medicine.
32. Labeling, packaging of feed and feed additives is carried out in accordance with the legislation of the Republic of Kazakhstan.
8. Requirements for the safety of feed and feed additives
when they are destroyed
33. Feed and feed additives are withdrawn from circulation when:
1) non-compliance with the requirements established by the legislation of the Republic of Kazakhstan in the field of veterinary medicine and food safety and this Technical Regulation;
2) the absence of relevant documents confirming their origin and safety;
3) the presence of obvious signs of damage, pollution, unpleasant odor;
4) detection of especially dangerous diseases of animals and birds.
34. Feed and feed additives withdrawn from circulation are subject to veterinary and sanitary examination, the results of which determine their safety.
35. Destruction of feed and feed additives recognized by the results of the veterinary and sanitary examination as hazardous to animal health is carried out in the manner prescribed by the legislation of the Republic of Kazakhstan.
9. Confirmation of conformity of feed and feed additives
36. Confirmation of the conformity of feed and feed additives is carried out in accordance with the requirements of the current legislation of the Republic of Kazakhstan.
10. List of harmonized regulatory documents
37. The list of harmonized standards (evidence base) that ensure the fulfillment of the requirements established by this Technical Regulation is given in Appendix 2 to this Technical Regulation.
38. In product standards, the requirements of this Technical Regulation are mandatory.
39. Harmonization of applicable current standards for feed and feed additives that ensure compliance with the safety requirements established by this Technical Regulation is carried out in accordance with the legislation of the Republic of Kazakhstan on technical regulation.
11. Terms and conditions of entry into force
40. This Technical Regulation shall enter into force six months after the date of the first official publication.
41. Since the entry into force of this Technical Regulation, regulatory legal acts and normative and technical documents in force on the territory of the Republic of Kazakhstan, until they are brought into line with this Technical Regulation, are applied in the part that does not contradict this Technical Regulation.
Scroll
types of products subject to
technical regulation
Product types | TN VED code |
|
Feed grain: 1) wheat 4) corn 8) sunflower seeds 9) triticale | ||
Leguminous fodder crops: 1) spring vetch 3) fodder beans 4) small-seeded lentils 6) fodder lupine |
|
|
Vitamin flour from tree greens, flour and grits fodder algae | ||
Feed products flour and cereals industry: 2) feed flour |
|
|
Feed products of the oil mill industry 2) peanut 3) sunflower 4) cotton 5) linen 6) rapeseed 7) hemp 8) rapeseed 9) sesame 2) peanut 3) sunflower 4) cotton 5) linen 6) rapeseed 7) hemp 8) castor oil 9) corn | ||
Maize fodder sludge hydrate | ||
Feed products of the brewery industry: 1) barley malt 2) beer pellet 3) licorice sprouts | ||
Feed products of starch industry: 1) corn feed 2) wheat feed 3) corn gluten | ||
Feed products of alcohol production: 1) grain potato stillage 2) molasses stillage | ||
Sugar feed products industry: 1) beet pulp 3) molasses | ||
Grain pulp | ||
Corn pulp | ||
Wheat pulp | ||
Barley pulp | ||
Rye pulp | ||
Potato pulp | ||
Feed products canned and vegetable drying industry: 1) pomace fruit 2) berry pomace 3) vegetable pomace | ||
Animal products and by-products products of its processing, used for the production of combined 1) Feed products meat and poultry processing industry: meat flour meat and bone meal blood meal bone meal from hydrolyzed feather semi-finished bone feed animal fat 2) Fish feed products industry: fish meal from mammals crustaceans and invertebrates | ||
Dairy feed products industry: 1) skimmed milk powder (reverse) 2) whey dry 3) dry whole milk replacer | ||
Protein-vitamin and amido-vitamin | ||
Microbiological products industry: 1) fodder yeast 2) enzymes 3) amino acids 4) vitamins | ||
Mineral Feed Additives origin: 1) limestone flour 2) stern chalk 3) shell rock 4) feed calcium phosphate 5) zeolites, bentonites | ||
Organic synthesis products feed methionine | ||
Compound feed for productive poultry (chickens, ducks, geese, turkeys, pheasants, quails, ostriches, | ||
Compound feed concentrates for game | ||
Compound feed concentrates for pigs: 1) for suckling piglets 2) for control fattening of pigs 3) complete feed for bacon fattening pigs 4) complete feed for pigs | ||
Compound feed concentrates for large cattle | ||
Compound feed concentrates for sheep | ||
Compound feed concentrates for horses: 1) feed concentrates for workers 2) feed concentrates, granular for breeding mares 3) feed concentrates, granulated for trainees and sport horses 4) feed concentrates, granular for fatteners 5) feed concentrates for growing and fattening of young animals of meat 6) compound feed concentrates for dairy | ||
Compound feed concentrates for fur animals (foxes, arctic foxes, sables, minks) | ||
Compound feed concentrates for rabbits and | ||
Compound feed concentrates for pond fish (of the year, breeding young, producers, two-year-olds, three-year-olds pond cyprinids and trout) | ||
Compound feed concentrates for salmon, sturgeon fish | ||
Dry and concentrated for unproductive animals: 1) dogs and cats 3) aquarium fish 4) rodents | ||
Premixes |
Scroll
harmonized regulatory documents
GOST 80-96 Sunflower cake. Specifications.
GOST 2081-92 Carbamide. Specifications.
GOST 2116-2000 Feed meal from fish, marine mammals, crustaceans and invertebrates. Specifications.
GOST 2929-75 Oatmeal. Specifications.
GOST 4808-87 Hay. Specifications.
GOST 5060-86 Malting barley. Specifications.
GOST 6201-68 Polished peas. Specifications.
GOST 6484-96 Technical stearic acid (stearin). Specifications.
GOST 9419-78 Reagents. Stearic acid. Specifications.
GOST 7067-88 Spring vetch. Specifications.
GOST 7169-66 Wheat bran. Specifications.
GOST 7170-66 Rye bran. Specifications.
GOST 9265-72 Feed concentrates for working horses. Specifications.
GOST 9268-90 Feed concentrates for cattle. Specifications.
GOST 10199-81 Compound feed concentrates for sheep. Specifications.
GOST 10385-88 Compound feed for pond cyprinids. Specifications.
GOST 10417-88 Feed beans. Requirements for procurement and supply.
GOST 10418-88 Small-seeded lentils. Requirements for procurement and supply.
GOST 10419-88 China. Requirements for procurement and supply.
GOST 10853-88 Oilseeds. Method for determining pest infestation.
GOST 11321-89 Feed lupine. Requirements for procurement and supply.
GOST 12220-96 Tested soybean fodder meal. Specifications.
GOST 13496.0-80 Compound feed, raw materials. Sampling methods.
GOST ISO 5725.1-2003 Mixed feed, mixed feed raw materials. Method for the determination of polychlorinated biphenyls in feed, feed additives and food raw materials.
GOST 13496.1-98 Mixed feed, mixed feed raw materials. Methods for determining the content of sodium and sodium chloride.
GOST 13496.2-91 Feed, feed, mixed feed raw materials. Method for determination of crude fiber.
GOST 13496.3-92 (ISO 6496-83) Compound feed, compound feed raw materials. Moisture determination methods.
GOST 13496.4-93 Feed, feed, mixed feed raw materials. Methods for determining the content of nitrogen and crude protein.
GOST 13496.5-70 Compound feed. Ergot determination method.
GOST 13496.6-71 Compound feed. Method for isolating microscopic fungi.
GOST 13496.7-97 Feed grain, products of its processing, animal feed. Methods for determining toxicity.
GOST 13496.8-72 Compound feed. Methods for determining the fineness of grinding and the content of unground seeds of cultivated and wild plants.
GOST 13496.9-96 Mixed feed. Methods for determining the metal-magnetic impurity.
GOST 13496.10-74 Compound feed. Method for determination of spore content of smut fungi.
GOST 13496.12-98 Mixed feed, mixed feed raw materials. Method for determining total acidity.
GOST 13496.13-75 Compound feed. Methods for determining the smell, pest infestation of grain stocks.
GOST 13496.14-87 Feed, feed, mixed feed raw materials. Method for determination of ash insoluble in hydrochloric acid.
GOST 13496.15-97 Feed, feed, mixed feed raw materials. Methods for determining the content of crude fat.
GOST 13496.17-95 Feed. Methods for the determination of carotene.
GOST 13496.18-85 Compound feed, compound feed raw materials. Methods for determining the acid number of fat.
GOST 13496.19-93 Feed, feed, mixed feed raw materials. Methods for determining the content of nitrates and nitrites.
GOST 13496.20-87 Mixed feed, mixed feed raw materials. Method for determination of pesticide residues.
GOST 13634-90 Corn. Requirements for procurement and supply.
GOST 13797-84 Vitamin flour from tree greens. Specifications.
GOST 13979.0-86 Cakes, meal and mustard powder. Acceptance rules and sampling methods.
GOST 13979.1-68 Cakes, meal and mustard powder. Methods for determining moisture and volatile substances.
GOST 13979.2-94 Cakes, meal and mustard powder. Method for determining the mass fraction of fat and extractives.
GOST 13979.4-68 Cakes, meal and mustard powder. Methods for determining color, odor, amount of dark inclusions and fines.
GOST 13979.5-68 Cakes, meal and mustard powder. Method for determination of metal impurities.
GOST 13979.6-69 Cakes, meal and mustard powder. Ash determination method.
GOST 8758-76 Chickpeas. Requirements for procurement and supply.
GOST 8759-92 Sorghum. Requirements for procurement and supply.
GOST 17109-88 Soya. Requirements for procurement and supply.
GOST 9353-90 Wheat. Requirements for procurement and supply.
GOST 9404-88 Flour and bran. Moisture determination method.
GOST 17483-72 Feed animal fat. Specifications.
GOST 17498-72 Chalk. Types, brands and basic technical requirements.
GOST 17536-82 Feed flour of animal origin. Specifications.
GOST 17681-82 Flour of animal origin. Test methods.
GOST 18057-88 Coarse feed. Method for isolating microscopic fungi.
GOST 18221-99 Compound feed for poultry. Specifications.
GOST 18691-88 Artificially dried grass feed. Specifications.
GOST 19092-92 Buckwheat. Requirements for procurement and supply.
GOST 19856-86 (ST SEV 5367-85) Pesticides. General names.
GOST 20083-74 Feed yeast. Specifications.
GOST 21650-76 Means of fastening packaged cargoes in overpacks. General requirements.
GOST 21669-76 (ST SEV 6530-88) Compound feed. Terms and Definitions.
GOST 21149-93 Oat flakes. Specifications.
GOST 22391-89 Sunflower. Requirements for procurement and supply.
GOST 22455-77 Algal fodder flour and semolina. Specifications.
GOST 22983-88 Millet. Requirements for procurement and supply.
GOST 23153-78 Feed production. Terms and Definitions.
GOST 23423-89 Feed methionine. Specifications.
GOST 23635-90 Enzyme preparation amylosubtilin G3x. Specifications.
GOST 23637-90 Haylage. Specifications.
GOST 23638-90 Silage from green plants. Specifications.
GOST 26663-85 Transport packages. Formation using packaging tools. General technical requirements.
GOST 23999-80 Feed calcium phosphate. Specifications.
GOST 26180-84 Feed. Method for determining ammonia nitrogen and active acidity (pH).
GOST 26498-85 Feed yeast. Packing, marking, transportation and storage.
GOST 26826-86 Lime flour for the production of feed for farm animals and poultry and for feeding poultry.
GOST 26927-86 Food raw materials and products. Mercury determination method.
GOST 26929-94 Food raw materials and products. Sample preparation.
Mineralization to determine toxic elements.
GOST 26932-86 Food raw materials and products. Lead determination method.
GOST 27262-87 Feeds of plant origin. Sampling methods.
GOST 27547-87 Vitamin E (a-tocopherol acetate) microgranulated fodder. Specifications.
GOST 27668-88 Flour and bran. Acceptance and sampling methods.
GOST 27786-88 (ST SEV 5896-87) Kormogrizin. Specifications.
GOST 27850-88 Food rye for an expert. Specifications.
GOST 25344-82 Feed barley. Specifications
GOST 27978-88 Green feed. Specifications.
GOST 28001-88 Feed grain, products of its processing, animal feed. Methods for the determination of mycotoxins: T-2 toxin, zearalenone (F-2) and ochratoxin A.
GOST 28256-89 Feed concentrates for dairy mares. Specifications.
GOST 28672-90 Barley. Requirements for procurement and supply.
GOST 28673-90 Oats. Requirements for procurement and supply.
GOST 28736-90 Feed root crops. Specifications.
GOST 29136-91 Feed meal from fish, marine mammals, crustaceans and invertebrates. Method for determining toxicity.
GOST 29272-92 Dry rye malt. Specifications.
GOST R 51095-97 Premixes. Specifications.
GOST R 51417-99 (ISO 5983-97) Feed, feed, mixed feed raw materials. Determination of the mass fraction of nitrogen and calculation of the mass fraction of crude protein. Keldahl method.
GOST 12.3.041-86 SSBT Use of pesticides for plant protection. Safety requirements.
GOST R 51425-99 Feed, feed, mixed feed raw materials. Method for determination of the mass fraction of zearalenone.
GOST 51899-2002 Granular compound feed. General technical requirements.
GOST R 50817-95 Feed, compound feed, compound feed raw materials. Method for determination of crude protein, crude fibre, crude fat and moisture using near infrared spectroscopy.
GOST R 51422-99 Feed, feed, mixed feed raw materials. Method for determination of the mass fraction of urea.
